Thermic paint 10 Liter


Ships worldwide!


10 Liter Thermic Paint

Thermic Paint Heat Generating Paint Nano-tubes.

Paint any wall or ceiling into a very energy efficient radiant infrared heating panel. Using low energy consumption. Using safe extra low voltages (24V) and suitable for every type of room.
250 watts / m2 consumed typical is 45°c warm. Powered by 24V transformers low consumption rate can be integrated with Solar PV systems to further assist with energy savings.
“It warms extremely efficiently and can be distributed in any form on the wall surface. The painted walls are about 45°c warm.
Typical consumption productivity: 7 m²/32oz. To heat a 25 square meter living room, you need five square meters of heating paint.

Thermic Paint can be fed directly from solar panels with an inverter. Solar energy generated by a photo-voltaic system can be used directly as a power supply.

Thermic Paint is an alternative heat source which can be easily applied on surfaces to give warmth on spots where heaters are difficult to or can’t be placed or for people with an aesthetic appreciation for minimalism in homes, offices etc.

The infrared heating coating acts as a super capacitor to store energy to discharge it in plasmonic waves at short wavelength also know as far infrared.
The coating has a low heat storage capacity, as a result of which the generated heat is directly released into the environment.
When electricity flows through the paint film, it comes across a natural resistance between the individual nano-particles. These “collisions” generate heat.
The heat is generated by direct use of non-hazardous low-voltage sources (e.g. 24 VDC battery or solar power)

There is no wear and tear, it last forever. It remains functional as long as you want. You can drill a hole in it, hammer nails into it, overpower it, the paint and heating remains functional.

Thermic Paint Heat generating paint has a wide field of possible uses.

  • Heating your garage, boat, truck, car, everywhere where heating is required..
  • De-icing – removal of snow, ice or frost from a surface, also prevent parts from icing.
  • Heating of surface of any shape.
  • Very easy to apply, like any other paint.
  • Direct use of low-voltage sources (e.g. 12/24VDC, solar power).
  • Very simple electrical connection.
  • Simple regulation and control.
  • High electrical safety as it works on VDC low voltage.
  • Perfectly uniform heating of large surface areas without hot spots.
  • Very cost-efficient heat in all aspects.
  • High heating power.
  • Heat up and cool down almost immediately.
  • 32 oz covers approx: >75 ft²/32oz

Appropiate minimum paint film thickness (wet/ dry) 200 μm / 45 μm
Heat Dissipation: >60°C ( >140°F ) DC 24 Volt
Far infrared radiation feels like comfortable heat like sunlike radiant heat.
The heat generating paint must be completely cured (dry) before using it as heat generating paint.

For power supply please contact us.

1 Liter covers approx: >75 ft²/32oz

Nanotubes Thermal Far Infrared Radiation Coatings
Heat Generating Paint, Aside from the health benefits, (according to the US National Library of Medicine) it is very economical to use it as heating wherever it can be applied.
Very simple electrical connection. High electrical safety as it works on 12-24 VDC low voltage
You can apply on top of the thermohm paint the color you want to conceal that there is thermohm paint beneath it.

Thermic Paint Heat Generating Paint shipping Information:

Free shipping worldwide!
Thermic Paint Heat Generating Paint is an aqueous non-hazardous substance and non-dangerous. Aqueous means water-based or waterborne paint.
Orders are processed/shipped within 7-20 business day.

Thermic paint coat: Any geometry possible, Also to install corners, Best possible distribution of heat in the room, Best possible energy efficiency, Unlimited lifetime.

WhatsApp Help Chat
Send via WhatsApp